SEaling – JOINTing
Seals are an essential part of any construction.
Because building components are subject to wide fluctuations in temperature and humidity, you need efficient and effective solutions. Find out what we can offer you.
SINGLE-SIDED POLYETHYLENE SHEETS
Intended for jointing
– Flexible and conformable product
– Good resistance to humidity and abrasion
– Easy to unroll and cut
– Particularly recommended for the assembly and sealing of tarpaulins and the fixing of protections to the wall when working with liquid screeds
The white cloth 8224A ensures the watertightness between the uncoupling strip and the floor insulation
width 75 mm easier to cover, good hold on the vapour barrier paper to ensure watertightness during the installation of the liquid screed
3160 and 3162 Barnier cloths are recommended for all waterproofing applications
AT171 tape for assembling and sealing polyethylene tarpaulins
SINGLE SIDED PVC FOAM TAPES
Compression sealing foam.
– Acrylic adhesive mass on one side and protected by a paper liner on the non-adhesive side
– Allows air and water tightness when compressed
– Different densities depending on the Thickness from 0,8mm to 15mm black or white.
– Soft, medium and hard range depending on the compression ratio
White foam 3204 Scapa is used as a water, air and dust seal when compressed, black version for 3259 and 3099, grey for 3507
SINGLE-SIDED POLYETHYLENE FOAM TAPES
Permanent seal for the bottom of glazing joints.
Single-sided, self-adhesive, closed-cell PE foam reinforced with wefts and provided with a special adhesive
111 range (white or black foam without liner) 120 and 122
SINGLE-SIDED EPDM FOAM TAPES
Sealing and jointing
– Waterproof cellular rubber foam based on pure neoprene or EPDM (ethylene propylene diene monomer) membrane
– High resistance to chemicals, oils and solvents
Range 150-180 and 686-1210
SILICONE ELASTOMER FOAM TAPES
Sealing and jointing / Other flexibility
– Temperature resistance
– Very easy compression depending on density
Norseal F12-R10470M range
FOAM TAPES FOR JOINT BOTTOMS AND ACOUSTICS
Eliminates sound bridges in joint areas
– Acoustic partition tape made of a flexible closed cell polyethylene foam
– Excellent soundproofing
– High resilience
– Very good resistance to aging
Several references are available: Norseal 111 type
SINGLE-SIDED FOAMS FOR FIRE DOORS
Developed for critical areas requiring fire protection
– Expandable and fire resistant when heated to over 200°, expands and forms a char blocking product to block fire, smoke and hot gases
– Airtight, waterproof
– Compressible and resilient
– Thermally insulating
Patented high performance FS1000 foam tape with a unique combination of sealing properties
SINGLE AND DOUBLE SIDED BUTYL TAPE
Ideal for sealing roof joints / Double sided to maintain a flexible bond
– Self-adhesive butyl sealing tapes laminated with a reinforced stretch aluminum foil
– Highly conformable and flexible, fits irregular geometries of chimneys, dormers, gutters or any other protruding roof element
– Excellent temperature resistance and sound and vibration damping
Single-sided tapes TE35, Butylene Alu Pro, Alu Sound, Alu brico TBAND and Duo-R black or red
The special creping of the Alu Wave aluminum allows the tape to be extended by more than 60% in the direction of unwinding